Product ID:EPOXY RESIN PART B (AMBER) P/N H8102-AA
MSDS Date:07/11/1995
FSC:6080
NIIN:01-391-1252
MSDS Number: CFFKS

DIGITAL EQUIPMENT CORP

146 MAIN ST
MAYNARD, MA 01754-2504
US

Emergency Phone: 800-228-5635 EXT 123

Info Phone: 508-493-5111 / FAX 508-493-8780

Cage: 15476

MABCON INTL (310-316-1831)

UNKNOW MAYNARD, MA 01754-2504 US

Telephone: 508-479-3046

Cage: 05SX8

SILICA GEL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 3 - 4%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

TRIETHYLENE TETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 19%

POLYAMIDE RESIN (REACTIVE POLYAMIDE)

CAS: 37189-83-6

Fraction By Weight: 78%

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYE CORROSION. REPEAT EXPOSURE
MAY CAUSE DERMAL SENSITIZATION.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:SKIN-SENSITIZATION, CORROSION. EYES-CORROSION.
NONE GIVEN FOR INHALATION & INGESTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES-FLUSH WITH LOTS OF WATER FOR 15 MINUTES. CONTACT A
PHYSICIAN. SKIN-PROMPTLY WASH WITH MILD SOAP & WATER. SEE A
PHYSICIAN IF SYMPTOMS PERSIST. INHALED-NOT APPLICABLE.
INGESTED-SEEK IMMEDIATE MEDIC AL ATTENTION.

Flash Point:264F,129C
Extinguishing Media:HALON, WATER SPRAY/FOG, CARBON DIOXIDE, DRY
CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL FIRE FIGHTER'S PROTECTIVE GEAR WHEN FIGHTING FIRES IN CONFINED
AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
PRODUCED UPON COMBUSTION.

Spill Release Procedures:SCRAPE UP & TRANSFER TO METAL CONTAINER FOR
DISPOSAL. USE RAG OR PAPER TOWEL & DETERGENT TO CLEAN RESIDUE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. DO NOT MIX
BATCHES OF GREATER THAN 1 POUND TOTAL. FOLLOW RECOMMENDED CURING
PROCEDURES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
EYE WASH STATION.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
KEY1=C2. PART B OF TWO PART KIT. SEE PNI A FOR PART A.

HCC:B2
Boiling Pt:B.P. Text:531F,277C
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:0.98
Evaporation Rate & Reference:<0.01 (METHOD NOT GIVEN)
Solubility in Water:APPRECIABLE
Appearance and Odor:AMBER LIQUID; AMMONIA ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS MINERAL ACIDS.
Stability Condition to Avoid:AVOID MIXING RESIN & CURING AGENT IN
BATCHES GREATER THAN 1 LB. DO NOT HEAT UNLESS CURING SURFACES TO
BE BONDED.
Hazardous Decomposition Products:NOT AVAILABLE.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES GREATER THAN ONE POUND.

Waste Disposal Methods:CURED PRODUCT IS NONHAZARDOUS. NO SPECIAL
REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.